Safety, Quality, Integrity, Respect, Excellence & Innovation
| Place of Origin: | China |
|---|---|
| Brand Name: | HUISEN |
| Model Number: | HS-TS-PP |
| Minimum Order Quantity: | 1000pcs |
| Price: | $1.5-2.5/pc |
| Packaging Details: | Wooden pallet |
| Delivery Time: | According to the quantity |
| Payment Terms: | T/T, Western Union |
| Supply Ability: | 1000pcs per day |
| Aperture: | 35/50/80mm | Size: | 1000*1000mm, Or At Customers' Requirement |
|---|---|---|---|
| Material: | PP | Product Name: | White PP Lamella Tube Settler Inclined Pipe For Sedimentation Tank |
| Thickness: | 0.4-1mm | Color: | White |
| High Light: | lamella plate settlers,lamella water treatment |
||
White PP Lamella Tube Settler Inclined Pipe For Sedimentation Tank
Inclined pipes are mainly used for sedimentation and desanding. In recent ten years, it has been widely used in water supply and drainage engineering and become a water treatment device. The utility model has the advantages of wide application range, high treatment effect, small floor area, etc. In addition to water purification and chemical plant sewage, domestic sewage, coal mine water treatment, coal washing plant water treatment, power plant concentration pool, tailings water treatment, pharmaceutical plant, paper mill wastewater treatment, such as sand removal and rapid sedimentation, oil separation and tailings concentration, etc., especially for water plant and waste water treatment project, the transformation efficiency is better. It is suitable for the treatment of water inlet Desanding, general industrial and domestic water supply sedimentation, sewage sedimentation, oil separation, tail tension concentration, etc. it is not only suitable for new construction, but also suitable for the reconstruction of existing old pool, which can achieve good economic benefits. straight pipe is mainly used for biological filter with high load, tower biological filter, submerged biological filter (also called contact oxidation tank) and microbial carrier of biological turntable to carry out biochemical treatment of industrial organic wastewater and urban sewage.
1. The treatment efficiency is higher than that of the activated sludge process. The general hydraulic load is 100-200m3 / m2 / day, and the organic load is 2000-5000g / m3, so the occupied area is reduced.
2. The aeration intensity is lower than that of the activated sludge method, and there is no need for sludge return, so it can reduce power consumption and simplify management.
3. The amount of sludge is small, which reduces the workload of post-treatment such as sludge dewatering.
4. The sludge produced has good sedimentation, which is conducive to the removal of suspended solids in the later stage.
5. It has strong adaptability, can adapt to a wide range of different water quality, has strong endurance to the impact load of water quality and water quantity mutation, and maintains stable treatment effect.
6. As long as the scientific operation management is carried out and the sewage is flushed regularly, the blockage will not be caused generally.
Technology Parameter
| Material | Dimension(mm) | Color | Thickness(mm) | Specific surface area(m2/m3) | Porosity(m2/m3) |
| PP | Dn35 | White | 0.4 | 169.4159 | 0.957 |
| Dn50 | 0.5 | 119.0055 | 0.9739 | ||
| Dn80 | 0.8 | 99.3071 | 0.9481 | ||
| PVC | Dn35 | Black or Blue | 0.4 | 236.0987 | 0.9487 |
| Dn50 | 0.5 | 119.0055 | 0.9799 | ||
| Dn80 | 0.8 | 99.3071 | 0.6781 |
Installation procedure
1. Installation of sludge discharge pipe at the bottom of inclined pipe sedimentation tank the installation sequence of inclined pipe sedimentation tank generally starts from the bottom, and the installation of sludge discharge pipe system at the bottom is completed first to ensure that the opening of sludge discharge pipe meets the design requirements, is fixed firmly, and is not allowed to enter the next installation sequence until it is checked to be correct. A kind of
2. Complete the packing support installation of inclined pipe according to the packing support installation construction drawing of inclined pipe sedimentation tank, first install the packing support in place, check that all welding joints are firm, the support strength is enough to bear the packing weight, and complete the anti-corrosion treatment on the support surface;
A kind of
3. Complete the hot joining of inclined pipe packing according to the hot joining method of inclined pipe packing, each packing of inclined pipe packing shall be treated as a separate hot joining unit, which is 1m2 after the hot joining of one unit. After the hot joining, it shall be stacked orderly on the site (a small amount of loose pieces shall be reserved for standby). A kind of
4. Assembly in inclined tube packing tank assemble the pressed packing unit on the upper part of the packing support from left to right. Keep the angle of 60 ° unchanged all the time. Each unit shall be properly pressed during assembly in sequence. If the size is not right when assembling to the right side, it is necessary to use a piece of oblique tube packing according to the size to iron and connect until all are in place.
5. The upper part of the inclined pipe packing is fixed because the proportion of the inclined pipe packing is 0.92, which is slightly less than water, the inclined pipe packing needs to be pulled from left to right above the packing after it is assembled in the tank The round steel of 10 mm shall be reinforced (two round steels are required to pass the upper part of each unit filler). Both ends of the round steel shall be reliably fixed on the wall of the sedimentation tank. After the installation of the round steel, it can well prevent the possible loosening and floating of the inclined pipe filler in the initial use. The round steel shall be corrosion-resistant with coal tar epoxy asphalt.
Operation and debugging
1. Check whether the water inflow is uniform, and do not impact the sedimentation tank and affect the sedimentation effect
2. Adjust the height and levelness of the outlet weir to a proper level to keep the outlet water uniform;
3. After the above construction process, the packing installation of inclined sedimentation tank has been completed. After normal operation, sludge discharge cycle shall be determined according to the concentration of suspended solids in the influent, and timely sludge discharge shall be paid attention to to to ensure that the inclined tube sedimentation tank always maintains good operation status and satisfactory effluent quality.
